MP211 Series PLC and ViewPLUS SCADA software were used to control the water distribution system of military base areas in Hakkari, Türkiye. Tank water level and pump status information, failure tracking is done through the system.
- Over 50 base areas
- Over 50 Mikrodev MP211 series PLC
- 2000 data control via ViewPLUS SCADA
- Water tank level monitoring
- Aging pump control
- Flow control
- Pipeline pressure monitoring
- Fault tracking
- Instant chart tracking, historical report analysis
Other Post
All Posts
WHAT IS THE IEC61850 ?
What is the IEC61850 ?
IEC61850, especially used in electrical distribution systems, is a communication protocol. IEC61850 was developed to standardize and facilitate data exchange between components
Increasing Efficiency: Using MODBUS Gateway in PLC Programming
In the rapidly evolving landscape of industrial automation, the integration of Programmable Logic Controllers (PLCs) and communication protocols holds vital importance. The aim of this article is to p
Republic of Türkiye General Directore of Agricultural Enterprises (TIGEM) Pivot Arm Irrigation, Fertilizing & Seed Dressing SCADA System
Mikrodev PLC and Remote I/O products were used in the Pivot Arm Irrigation, Fertilization and Seed Dressing SCADA System at more than 90 points in Konya - Türkiye region. Agricultural irrigation area
What is the MQTT?
What is the MQTT Communication Protocol?
The rapid proliferation of Internet of Things (IoT) and other similar distributed systems has increased the importance of data communication. The requirements
OPC UA and MQTT in Industrial Communication: Integration in Brownfield Factories
OPC UA and MQTT: Definition and Fundamental Differences
In the context of industrial communication, OPC UA (Open Platform Communications Unified Architecture) and MQTT (Message Queuing Telemetry Tran
Data Security in Industrial SCADA Systems: Best Practices for SCADA Security, Industrial Cybersecurity, and Penetration Testing
SCADA systems—at the heart of industrial automation—ensure the management of production lines and the continuity of processes. While these systems supervise critical sectors such as energy, water, gas
What is a Distributed Control System (DCS)?
Distributed Control System (DCS) is an automation system and is used to control a manufacturing facility or an industrial process. These systems work in connection with each other by communicating man
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming is a coding language used for programming standards for PLC devices. In this programming, there are function blocks
Read Electric Meters with DLMS, Integrate with MODBUS
Read Electric Meters with DLMS, Integrate with MODBUS
In energy management processes, fast, reliable, and easy access to data is becoming increasingly important. One of the most widely used standards
Salda Lake Environmental Protection Wastewater Management System
MP110 series PLC and ViewPlus SCADA products were used in the wastewater drainage system of the structures around Salda Lake in Burdur Turkey under the leadership of the Republic of Türkiye Ministry o
