Mikrodev IoT protocol gateway product family was preferred in the Istanbul Anadolu Yakası OIZ Automatic Meter Reading System Project in Türkiye. In the current system, over the MDC100 Series IoT Gateway product family, more than 200 electricity meters are read with the IEC 62056-21 protocol and more than 200 water meters are read with the MODBUS protocol and the data is transferred to the remote system. Data transfer to remote systems is carried out via the integrated GSM modem. Report outputs (.xlsx file format) can be created by selecting the report template over ViewPLUS SCADA.
- More than 50 stations
- Over 12000 data tracking via ViewPLUS SCADA
- Over 400 electricity meters and water meters
- Daily, monthly consumption values on the basis of stations
- Project designs suitable for billing system
- Energy data monitoring and analysis portals
- Ability to export energy data in .xlsx format
- Full integration with other systems via database
Electiricity Meter Report Template:
Water Meter Report Template:
Other Post
All Posts
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming and Its Relation to the PLC Devices
IEC 61131-3 Programming is a coding language used for programming standards for PLC devices. In this programming, there are function blocks
What is Programmable Logic Controller Systems (PLC)?
What is Programmable Logic Controller Systems (PLC)?
A PLC is an electronic device used to perform sequencing, timing, speed and motion controls in industrial systems. These devices allow for logica
Bursa Inegol OIZ 34.5 KV Medium Voltage Power Distribution Network SCADA System
Mikrodev products were used in energy monitoring and controls throughout the Inegol Organized Industrial Zone in Bursa, Türkiye. Cutter position information, controls and fault tracking are done throu
Digital Transformation in Transformer Substations: SCADA and Substation Automation
Energy is the lifeblood of modern civilization. In the process of delivering this energy from generation to the end consumer in an uninterrupted, high-quality, and secure manner, the most critical nod
What is a Distributed Control System (DCS)?
Distributed Control System (DCS) is an automation system and is used to control a manufacturing facility or an industrial process. These systems work in connection with each other by communicating man
TUBITAK MAM(Marmara Research Center) MARTEK Building Automation & SCADA System
Building automation and SCADA system controls throughout TUBITAK Marmara Research Center MARTEK are made with Mikrodev products and software. Air conditioning, lighting and energy controls of the buil
Kocaeli-Gebze VI. (IMES) OIZ Energy Tracking System
Mikrodev IoT protocol converter product family was preferred in the IMES Organized Industrial Zone Automatic Meter Reading System Project. In the current system, data of more than 600 electricity mete
Increasing Efficiency: Using MODBUS Gateway in PLC Programming
In the rapidly evolving landscape of industrial automation, the integration of Programmable Logic Controllers (PLCs) and communication protocols holds vital importance. The aim of this article is to p
Turkcell Telecommunication Istanbul Seabus (IDO) – Ferry Rotary Antenna Automation System
In the system, which aims to prevent Turkcell network disconnections in sea buses, the axis control of the base station is carried out according to the sea bus GPS coordinate information.
4 MP211
Istanbul Anadolu Yakası OIZ Automatic Meter Reading System
Mikrodev IoT protocol gateway product family was preferred in the Istanbul Anadolu Yakası OIZ Automatic Meter Reading System Project in Türkiye. In the current system, over the MDC100 Series IoT Gatew
