MP211 Series PLC and ViewPLUS SCADA software were used to control the water distribution system of military base areas in Hakkari, Türkiye. Tank water level and pump status information, failure tracking is done through the system.
- Over 50 base areas
- Over 50 Mikrodev MP211 series PLC
- 2000 data control via ViewPLUS SCADA
- Water tank level monitoring
- Aging pump control
- Flow control
- Pipeline pressure monitoring
- Fault tracking
- Instant chart tracking, historical report analysis
Other Post
All Posts
RTU or PLC? A Guide to Making the Right Choice in Water and Energy Projects
When you go out to the field, the picture is usually the same: distributed stations, pumping stations, reservoirs, substation yards, and at every point the same question arises: “What should we use to
Indonesia PLN Power Distribution System
Indonesian energy distribution company, energy monitoring and control system at more than 500 stations is made through the RTU300 series remote terminal unit.
Reading the data of cells in transfo
Republic of Türkiye Ministry of Environment, Urbanization and Climate Change Continuous Wastewater Tracking System
Mikrodev products were preferred at more than 100 stations in the Continuous Wastewater Monitoring System managed by the Republic of Türkiye Ministry of Environment, Urbanization and Climate Change.
Understanding the Differences Between PLC, DCS & SCADA
Understanding the Differences Between PLC, DCS & SCADA - A Selection Guide
In today's industrial landscape, the selection of an appropriate control system architecture plays a pivotal role in ens
HOW TO REDUCE MAİNTENANCE COSTS WİTH AGİNG FUNCTİONS İN PLC PROGRAMMİNG ?
Optimizing Control Systems with PLC, RTU, and SCADA
In the ever-evolving world of industrial automation, Programmable Logic Controllers (PLCs) play a crucial role in controlling and monitoring variou
SCL (CID, SED, ICD) Engineering in Substation Automation: From File to Commissioning
In a substation automation project, everything seems to start with cables and panels. But the moment you open your first packet capture file in the field, you see the reality: the backbone that carrie
OPC UA and MQTT in Industrial Communication: Integration in Brownfield Factories
OPC UA and MQTT: Definition and Fundamental Differences
In the context of industrial communication, OPC UA (Open Platform Communications Unified Architecture) and MQTT (Message Queuing Telemetry Tran
Industrial Scalability in MQTT with Sparkplug B: The Right Topology and Automatic Discovery
The number of devices in the IIoT field is increasing rapidly. The free structure of MQTT is flexible, but in large facilities, this freedom can turn into disorder. This is where MQTT Sparkplug B come
Modbus Protocol and All Its Features
What is MODBUS Protocol and Its Features?
Modbus protocol is a serial communication protocol used to communicate between devices in industrial automation systems. Below you can find information about
Alarm Management ISA-18.2: SCADA Alarms, Event Management, Priority, and Operator Effectiveness
Imagine 3,000 alarms sounding in one shift. The operator tries to pick out the real danger within the noise, stress increases, and errors multiply. A critical pump stops a few minutes later, and the c
